Usually we got some confusion from some of your customer or engineers :in fact we would like to find a metal prototype manufacturers made some product, we requiring the material is SUS316L stainless steel processing,
The manufacturer said is no problem, In fact, they use 316 stainless steel materials, The result was that the product didn’t meet the expected requirements, because the two materials were different,
For questions like this, in Sino Precision Machining Co.,Ltd.. for stainless steel material and all metal material analysis, control, use the following:
316L stainless steel material mechanical properties:
Tensile strength (Mpa) 485 MIN yield strength (Mpa) 170min elongation (%) 30 MIN area reduction (%) 40 MIN 316L stainless steel density 7.98g/cm3, hardness of HRB<90 HV<200 HBS<187
The comparison of chemical composition:
SUS316 stainless steel material chemical components:
C is less than 0.08, Si is less than 1.00, Mn is less than or equal to 2.00, P is less than 0.035, S is less than or equal to 0.03, Ni: 10.0-14.0, Cr: 16.0-18.5, Mo: 2.0-3.0.
Look at the chemical composition, 316L stainless steel material has better mechanical properties and more protection under the same conditions.
In Sino Precision Machining Co.,Ltd., in order to guarantee the quality , we have a special testing equipment to analyze the composition of the material, our XRF Analyzer analyzer when each batch of incoming material testing for metallic materials, ensure that qualified raw materials for production.
So what materials can we make?
We are not limited to a certain type of raw materials, we can process hardware, plastic, etc
Metal material: aluminum alloy, magnesium alloy, zinc alloy, titanium alloy, stainless steel, martensite and austenite, duplex stainless steel), copper and copper alloy (red copper, brass, tin bronze, phosphor bronze, beryllium copper, copper alloy, lead brass) free cutting steel pin, all kinds of alloy tool steel, die steel, spring steel, bearing steel, tungsten steel, etc all metal materials available in the market.
Plastic material: ABS, ABS + PC, ABS + GF, PMMA, PVC, POM (steel), PA (nylon), PA + GF (nylon fiber, fiber with %), PP, PC, PET, PBT, PTFE (teflon), PBT + GF, PE, bakelite, carbon fiber, PEEK, PPSU, PEI/Ultem2300 etc.
If you are interested in the hardware model factory or have any questions, your can contact us immediately.
Editor: Sino Scarlett
All rights reserved http://sino-machining.com (Sino Precision Machining Co.,Ltd, a special attention to prototype and CNC precision parts of small batch production factory) reprint please indicate the source
Leave A Comment